Function Index
$#! · 0-9 · A · B · C · D · E · F · G · H · I · J · K · L · M · N · O · P · Q · R · S · T · U · V · W · X · Y · Z
E
 EdgeAngleBlend
 EdgeAngleCalculation
 EdgeConstraint
 EdgeControl
 EdgeMaximumGrowthRate, pw:: BlockUnstructured
 EdgeMaximumLength
 EdgeMinimumLength
 EdgeSpacingBlend
 EdgeSpacingCalculation
 elapsed, pwu:: Time
 element, pwu:: Transform
 empty, pwu:: Extents
 Enabled
 enclose, pwu:: Extents
 end, pw:: Mode
 EndDecay, pw:: SourceEntity
 EndHeight, pw:: DistributionGrowth
 EndLayers, pw:: DistributionGrowth
 EndMode, pw:: DistributionGrowth
 EndRate, pw:: DistributionGrowth
 EndSpacing
 EntityExportFilter, pw:: IOMode
 EntityIgnoreIfNameUsed, pw:: IOMode
 EntityMeshStyle, pw:: IOMode
 EntityType, pw:: Group
 EntityVisibility, pw:: IOMode
 EnvironmentMode, pw:: ProjectLoader
 equal
 equals, pw:: Object
 equation, pwu:: Plane
 evaluate, pw:: Rule
 examine, pw:: Examine
 excludeSource
 exit, pw:: Application
 explode
 export
 ExportDonorInformation, pw:: IOMode
 ExportParentElements, pw:: IOMode
 ExportPriority, pw:: Application
 ExportVCs, pw:: Application
 Extensions, pw:: Application
 extract, pw:: Curve
 extractBoundary, pw:: Shell
 extractCurves, pw:: Shell
 extractLines, pw:: Shell
$dom get/setEllipticSolverAttribute ?-edge index? EdgeAngleBlend < method | value >
This attribute is the boundary control function angle blend method.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeAngleBlend < method | value >
This attribute is the boundary control function angle blend method.
$dom get/setEllipticSolverAttribute ?-edge index? EdgeAngleCalculation method
This attribute is the boundary control function angle calculation method.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeAngleCalculation method
This attribute is the boundary control function angle calculation method.
$dom get/setEllipticSolverAttribute ?-edge index? EdgeConstraint constraint
This attribute is the boundary constraints of the structured domain.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeConstraint constraint
This attribute is the boundary constraints of the structured domain.
pw::DomainStructured get/setDefault EdgeControl func
This default is the boundary control function of all edges of a structured domain when it is created.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeControl func
This attribute is the boundary control function of a structured domain Edge.
pw::BlockUnstructured get/setDefault EdgeMaximumGrowthRate growth_rate
This default is the maximum spacing growth rate along an edge of an unstructured block when it is created.
pw::BlockUnstructured get/setDefault EdgeMaximumLength < Boundary | length >
This default is the maximum edge length of an unstructured block when it is created.
pw::DomainUnstructured get/setDefault EdgeMaximumLength value
This default is the maximum edge length of an unstructured domain when it is created.
pw::BlockUnstructured get/setDefault EdgeMinimumLength < Boundary | length >
This default is the minimum edge length of an unstructured block when it is created.
pw::DomainUnstructured get/setDefault EdgeMinimumLength value
This default is the minimum edge length of an unstructured domain when it is created.
$dom get/setEllipticSolverAttribute ?-edge index? EdgeSpacingBlend < method | value >
This attribute is the boundary control function spacing blend method.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeSpacingBlend < method | value >
This attribute is the boundary control function spacing blend method.
$dom get/setEllipticSolverAttribute ?-edge index? EdgeSpacingCalculation < method | value >
This attribute is the boundary control function spacing calculation method.
$subgrid get/setEllipticSolverAttribute ?-edge index? EdgeSpacingCalculation < method | value >
This attribute is the boundary control function spacing calculation method.
pwu::Time elapsed time
Get the number of fractional seconds that have passed since the given time
pwu::Transform element matrix i j
Get an element of a transform matrix
pwu::Extents empty
Create an empty extents box
$entity get/setEnabled ?-parents? enable
This attribute is the enabled status of the entity.
$framework get/setEnabled value
This attribute controls whether or not the framework is displayed when it is not the active framework.
pwu::Extents enclose target < pt | ext >
Return an extents box that is the target extents with the given point or extents box enclosed within it
$mode end
This action ends this mode and saves changes made during the mode.
pw::SourceEntity get/setDefault EndDecay value
This default is the end decay of a source when it is created.
$dist get/setEndHeight height
This attribute is the requested total height of layers at the end of the distribution.
$dist get/setEndLayers layers
This attribute is the requested number of layers at the end of the distribution.
$dist get/setEndMode mode
This attribute is the mode that is used in calculating the layer growth at the end of the distribution.
$dist get/setEndRate rate
This attribute is the growth rate of layers at the end of the distribution.
pw::Connector get/setDefault EndSpacing spacing
This default is the ending spacing of a subconnector when it is created.
pw::SourceEntity get/setDefault EndSpacing value
This default is the end spacing of a source when it is created.
$io get/setAttribute EntityExportFilter att_value
Set GridPro export filter type.
$io get/setAttribute EntityIgnoreIfNameUsed att_value
Ignore entities with existing names.
$io get/setAttribute EntityMeshStyle att_value
Specifies the file format’s entity mesh style.
$group set/getEntityType type
This action sets the entity type of the group.
$io get/setAttribute EntityVisibility att_value
Handling for entity visibility data.
$loader get/setEnvironmentMode environment
This attribute controls whether the load is environment only.
pwu::Quaternion equal quat1 quat2
Check if two quaternions are equal
pwu::Time equal time1 time2
Check if the given times are equal
pwu::Vector2 equal ?-tolerance tol? vec1 vec2
Check if two vectors are equal
pwu::Vector3 equal ?-tolerance tol? vec1 vec2
Check if two vectors are equal
$object equals object
This action checks if the the given object refers to the same object as this object.
pwu::Plane equation plane
Get the plane coefficients in a list
$rule evaluate
This action evaluates any assigned entities that have not been evaluated or that have changed since the last evaluation.
$examine examine ?-excludeCellTypes type_list?
This action executes the examine function for each entity added to the examine object.
$entity excludeSource source ?exclude?
This action explicitly excludes a source from affecting the grid of this entity
$shape excludeSource source ?exclude?
This action explicitly excludes a source from affecting the grid generated by this shape
pw::Application exit ?code?
This action shuts down the full application immediately, without any prompts to the user to warn about unsaved data.
$model explode
This action splits the model so that each quilt in the model is in it’s own model.
$quilt explode
This action splits the quilt so that each trim surface in the quilt is in it’s own quilt.
pw::Application export ?-format file_format? ?-precision fp_precision? ?-noOverwrite? ?-output data_type? ents filename
This action exports CAE data in a format specific to the currently selected analysis software.
pw::Database export ?-type file_type? ?-format file_format? ?-precision fp_precision? ?-noOverwrite? dbentity_list filename
This action exports the list of entities to the given file.
pw::Framework export ?-compress level? filename framework_path_list
This action exports one or more frameworks.
pw::Grid export ?-type file_type? ?-format file_format? ?-precision fp_precision? ?-surfaces surface_style? ?-facesOnly? ?-noOverwrite? ?-report report_var? entity_list filename
This action exports the list of entities to the given file.
pw::Overset export ?-path path? ?-clean?
Export files needed by the current overset grid assembler.
$io get/setAttribute ExportDonorInformation att_value
Should donor information be written in the ZoneGridConnectivity_t node when writing a CGNS file.
$io get/setAttribute ExportParentElements att_value
Should parent elements be included in Element_t nodes when writing a CGNS file.
pw::Application get/setCAESolverAttribute ExportPriority value
Controls the export method.
pw::Application get/setCAESolverAttribute ExportVCs value
Controls the export of volume conditions.
pw::Application getFileTypeAttribute Extensions
This gets the valid file type extensions.
$curve extract ?< -U | -V >? parameter surface
This action sets this curve as a constant paramater curve of the given surface.
$shell extractBoundary index
This action extracts a curve from the boundary of this shell.
$shell extractCurves ?-boundariesOnly? bend_angle
This action extracts curves from edges of this shell where the bend angle is greater than the given angle.
$shell extractLines ?-boundariesOnly? ?-shellCount shellsVar? ?-curveCount curvesVar? bend_angle
This action extracts lines from edges of this shell where the bend angle is greater than the given angle.