Function Index
$#! · 0-9 · A · B · C · D · E · F · G · H · I · J · K · L · M · N · O · P · Q · R · S · T · U · V · W · X · Y · Z
R
 read
 recallView, pw:: Display
 redo, pw:: Application
 refilter, pw:: Examine
 refresh, pw:: CutPlane
 RelaxationFactor
 remove
 removeAll
 removeAllBreakPoints, pw:: Connector
 removeAllLines, pw:: ExamineFilter
 removeAllPoints, pw:: SourcePointCloud
 removeAllSegments
 removeAlternatePoint
 removeAttachmentPoint, pw:: Framework
 removeBlock, pw:: CutPlane
 removeBreakPoint, pw:: Connector
 removeChild
 removeEdges, pw:: DomainUnstructured
 removeEntity
 removeFace, pw:: BlockUnstructured
 removeInteriorControlPoints
 removeInteriorPoints, pw:: Segment
 removeLastConnector, pw:: Edge
 removeLastDomain, pw:: Face
 removeLastEdge, pw:: Domain
 removeLastFace, pw:: Block
 removeLine, pw:: ExamineFilter
 removePoint
 removeSavedCut, pw:: Examine
 removeSegment
 removeState, pw:: Layer
 removeSubGrid
 renameNamedValue, pw:: Spacing
 renameState, pw:: Layer
 reorderChild, pw:: Framework
 repair, pw:: ProjectLoader
 RepairMode, pw:: ProjectLoader
 reparent, pw:: Framework
 replace, pw:: Merger
 replaceAllSegments
 replaceDistribution, pw:: Connector
 reset
 resetBodyNames, pw:: OversetNode
 resetGeneralDistributions, pw:: Connector
 resetRenderAttributes
 resetRotationPoint, pw:: Display
 resetUndoLevels, pw:: Application
 resetView, pw:: Display
 restoreState, pw:: Layer
 resultList, pw:: Collection
 resume, pw:: Solver
 reverse
 revolve, pw:: Surface
 rotate
 RotateAngle
 RotateAxisEnd
 RotateAxisStart
 rotation, pwu:: Transform
 RulesOption, pw:: ProjectLoader
 run
$io read
This action verifies the IO mode attributes and tries to read the file that is being imported.
$io read
This action verifies the IO mode attributes and tries to read the file that is being imported.
pw::Display recallView < slot | name >
This action restores the view specified by slot or name.
pw::Application redo
This action redoes one step.
$examine refilter
This action processes the computed examine data again with any modified values in the interval count or range limits without recalculating the examine functions on each entity.
pw::CutPlane refresh ? -force ?
This action runs the default metric function on any blocks cut by pw::CutPlane objects and updates the display of the cut planes.
$block get/setEllipticSolverAttribute RelaxationFactor < factor | value >
This attribute is the relaxation factor of the succesive over- relaxtion algorithm.
$subgrid get/setEllipticSolverAttribute RelaxationFactor < factor | value >
This attribute is the relaxation factor of the succesive over- relaxtion algorithm.
$dom get/setEllipticSolverAttribute RelaxationFactor < factor | value >
This attribute is the relaxation factor of the succesive over- relaxtion algorithm.
$subgrid get/setEllipticSolverAttribute RelaxationFactor < factor | value >
This attribute is the relaxation factor of the succesive over- relaxtion algorithm.
$collection remove entity_list
This action removes members from a collection.
$rule remove entity
This action removes an entity from the rule (can only call for non-global rules).
$examine removeAll
This action removes all entities from the examine object.
$group removeAll
This action removes all entities from the group.
$con removeAllBreakPoints
This action removes all of the break points from the connector.
$filter removeAllLines
This action removes all filter lines from the filter.
$curve removeAllPoints
This action removes all of the points from the point cloud.
$con removeAllSegments
This action removes all of the segments from the connector.
$curve removeAllSegments
This action removes all of the segments from the curve.
$srcCrv removeAllSegments
This action removes all of the segments from the curve.
$segment removeAlternatePoint
This action removes the alternate point of the circle.
$segment removeAlternatePoint
This action removes the alternate point of the conic.
$parent removeAttachmentPoint < index | name >
This action removes the attachment point specified either by index or name.
$cutPlane removeBlock $block
This action removes a block from the cutting plane and deletes the corresponding pw::Cut object.
$con removeBreakPoint index
This action removes the break point from the connector at the end of the subconnector with the given index.
$parent removeChild child
This action removes a child pw::Framework object from the framework.
$node removeChild child
This action removes the specified node from the parent which causes the specified node to be deleted.
$dom removeEdges ?-preserve?
This action removes all of the domain’s edges.
$examine removeEntity entities
This action removes one or more entities from the examine object.
$group removeEntity entity_list
This action removes one or more entities from a group.
$block removeFace $face
This action removes a face from the block.
$con removeInteriorControlPoints
This action removes the interior control points of each segment of this connector.
$curve removeInteriorControlPoints
This action removes the interior control points of each segment of this curve.
$srcCrv removeInteriorControlPoints
This action removes the interior control points of each segment of this source curve.
$segment removeInteriorPoints
This action removes all of the interior control points.
$edge removeLastConnector
This action removes the last connector from this edge.
$face removeLastDomain
This action removes the last domain added to this face.
$dom removeLastEdge
This action removes the last edge added to this domain.
$block removeLastFace
This action removes the last face added to this block.
$filter removeLine index
This action removes a filter line at the given index including any children lines if the type of the line is DecisionBegin or DecisionEnd.
$segment removePoint index
This action removes the control point at the given index.
$cloud removePoint index
This action removes a point from the source point cloud.
pw::Examine removeSavedCut type value <block | form> ?-excludeCellTypes type_list? ?user_normal?
This action removes a cut from the list of saved cuts for block examine.
$con removeSegment < index | segment >
This action removes a segment from the connector.
$con removeSegment < index | segment >
This action removes a segment from the connector.
$srcCrv removeSegment < index | segment >
This action removes a segment from the curve.
pw::Layer removeState name
This action removes the save state from the list of saved states.
$block removeSubGrid < index | subgrid >
This action removes the subgrid from the block.
$dom removeSubGrid < index | subgrid >
This action removes the subgrid from the domain.
pw::Spacing renameNamedValue oldname newname
This action renames a named spacing value.
pw::Layer renameState old_name new_name
This action renames the save state.
$framework reorderChild $child index
This action reorders a child pw::Framework of the framework.
$loader repair mode ?connectors?
This action will repair the distributions of the out of sync connectors when the RepairMode attribute is set to Defer.
$loader get/setRepairMode mode
This attribute controls how connectors with grid points that are out of sync with their distribution functions are loaded.
$child reparent ?-path instance? source_parent destination_parent
This action removes the framework from one parent, a pw::Framework object, to another parent, also a pw::Framework object.
$merger replace ?-automatic? < node1 node2 | con1 con2 >
This action replaces the first entity with the second entity, unless -automatic option is specified.
$con replaceAllSegments segments
This action replaces all of the segments in the connector.
$curve replaceAllSegments segments
This action replaces all of the segments in the curve.
$srcCrv replaceAllSegments segments
This action replaces all of the segments in the curve.
$con replaceDistribution index distribution
This action replaces the distribution function of a subconnector, retaining the previously set spacings.
pw::Application reset ?-keep keep_list? ?reset_list?
Reset the settings of the application
$dim reset
This action sets the dimensions back to the last balanced state.
$rule reset
This action resets the criterion and removes all entities from the rule.
$node resetBodyNames
This action ensures that all children that are container nodes have unique display names.
$con resetGeneralDistributions
This action switches all of the subconnector distributions that are of type pw::DistributionGeneral to use the current default distribution.
$cut resetRenderAttributes
This action resets the various display settings of a cut to their default values.
$cut resetRenderAttributes
This action resets the various display settings of a cut to their default values.
pw::Display resetRotationPoint
This action resets the view rotation point to the center of visible objects.
pw::Application resetUndoLevels
This action resets the undo levels.
pw::Display resetView ?< +X | -X | +Y | -Y | +Z | -Z >?
This action resets the view so that the entire system is visible and centered in the display.
pw::Layer restoreState name
This action restores the layer visibility state to the curent display.
$collection resultList
This action returns a list of results in a collection.
$solver resume
This action resumes running the solver.
$dist reverse
This action reverses the distribution, including the spacing constraints.
$edge reverse
This action reverses the order of connectors that define this edge.
$surface revolve ?-angle revolve? ?-tolerance tol? generatrix < axis | point normal >
This action sets the surface by revolving a curve around another curve or axis.
pwu::Extents rotate ext quat
Rotate the given extents box by a quaternion
pwu::Quaternion rotate quat1 quat2
Rotate one quaternion by another quaternion
pwu::Transform rotate ?-anchor anchor_pt? matrix axis angle
Multiply the given transform matrix by a rotation transform
$block get/setExtrusionSolverAttribute RotateAngle degrees
This gets/sets the angle (degrees) for rotational extrusion.
$block get/setExtrusionSolverAttribute RotateAngle degrees
This gets/sets the rotational extrusion angle in degrees.
$dom get/setExtrusionSolverAttribute RotateAngle < Default | value_XYZ >
This attribute is the angle (degrees) for rotational extrusion.
$block get/setExtrusionSolverAttribute RotateAxisEnd axis
This gets/sets the ending axis vector for rotate extrusion.
$block get/setExtrusionSolverAttribute RotateAxisEnd axis
This gets/sets the axis’ end vector for rotate extrusion.
$dom get/setExtrusionSolverAttribute RotateAxisEnd < Default | value_XYZ >
This attribute is the axis’ end vector for rotate extrusion.
$block get/setExtrusionSolverAttribute RotateAxisStart axis
This gets/sets the starting axis vector for rotate extrusion.
$block get/setExtrusionSolverAttribute RotateAxisStart axis
This gets/sets the intial axis vector for rotate extrusion.
$dom get/setExtrusionSolverAttribute RotateAxisStart < Default | value_XYZ >
This attribute is the intial axis vector for rotate extrusion.
pwu::Transform rotation ?-anchor anchor_pt? < quat | axis angle | right up >
Return a transform matrix that is a rotation of the given quaternion, axis angle pair, or pair of vectors representing the new X and Y directions.
$loader get/setRulesOption option
This attribute controls how rules are processed by load.
pw::Overset run ?-path path? ?-host host -port port ?-clean??
Run the current overset grid assembly case using a local or remote grid assembly server.
$solver run ?-entities ents? ?< method | steps >?
This action runs the solver.