Pointwise   The Connector newsletter Pointwise Facebook Pointwise GitHub Pointwise LinkedIn Another Fine Mesh blog Pointwise Twitter Pointwise YouTube Y+ Calculator





Creating Akima Curves

An Akima curve is a curve segment in which the curve's slope is defined by an Akima control algorithm. The slope of an Akima curve at a given point uses a stencil of five consecutive points and produces curves with less overshoot. A result of the five point stencil is that three consecutive points which lie on a line will have linear slope between them.

A cubic Akima curve
  1. Click on Curve on the toolbar.
  2. Click Entity Type, Connector.
  3. In the Segments, Curve Segment Options frame, toggle on Akima.
  4. Click on an arbitrary point in the display window (point A).
  5. Click on a point similar to the location of point B.
  6. Click on a point similar to the location of point C.
  7. See the description below for how to edit the location of a control point before moving on to the next step.

  8. Apply
  9. OK

Editing Control Points

There are two quick ways to edit a control point's location before a connector is saved by using the Apply or OK commands. The first method simply requires that you move your cursor over the control point in the display window until it highlights in orange. Hold the left mouse button depressed while you move the point to a new location then release the left mouse button. The second method requires that you select the control point by holding the Ctrl key while left clicking on the point. The control point will become highlighted and the XYZ field in the Point Placement frame will update to contain its current coordinates; change the values and hit Enter to change the control point location.

Back to main D.I.Y. video tutorials page Back to the main DIY training page.

If you have questions about the steps outlined above or on any other meshing topic, please contact us via one of the following methods.

  • Send a question using the Get Help form.
  • Call our support engineers toll free at 800-4PTWISE.
  • Email our support engineers at support@pointwise.com.